2 smokes 4 ever Posted August 4, 2009 Report Share Posted August 4, 2009 can anyone recommend a good place for a rad repair got a real smal pin hole in the core (top line) in my rad been quoted £70-100 by GMX in essex £40- - 60 by Autocool radiators in worksop Link to comment Share on other sites More sharing options...
chrisexup Posted August 4, 2009 Report Share Posted August 4, 2009 Araldite is your friend Link to comment Share on other sites More sharing options...
2 smokes 4 ever Posted August 4, 2009 Author Report Share Posted August 4, 2009 Araldite starts to breakdown at around 100°C so is no good, besides i can't even see the hole Link to comment Share on other sites More sharing options...
thefatman Posted August 4, 2009 Report Share Posted August 4, 2009 Araldite starts to breakdown at around 100°C so is no good, besides i can't even see the hole JB weld, chop out some of the small joining fins until you can see the hole, a fiver a pack ,job done. Link to comment Share on other sites More sharing options...
will#224 Posted August 4, 2009 Report Share Posted August 4, 2009 My race bike has a large piece chopped out of the rad for the ram air. JB weld, its held tight for several years. There is a place in Morley, Leeds. Very reasonable but i guess a bit of a journey. Link to comment Share on other sites More sharing options...
Doug_R1 Posted August 5, 2009 Report Share Posted August 5, 2009 There's a good write up here: http://www.zx10r.co.uk/forum/index.php/topic,13067.0.html Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.