nevhall Posted July 18, 2009 Report Posted July 18, 2009 Well, I just want the head machined and barrels rebored, I'll do the porting myself. Anyone know who's on the ball these days? Had my old TZR250 top end done by Mr. Bob Farnham, but that's was about 10 years ago, but I'd happily go back.
Powerwheelie Posted July 18, 2009 Report Posted July 18, 2009 I would reccomend Bob aswell. But have a look to see if PJME do the work you want.
Gregorious77 Posted July 18, 2009 Report Posted July 18, 2009 http://www.pjme.co.uk/ I used them to do my 1985 RM125 rebore and piston kit. very knowlegeable and even gave me setup advice on the phone for correct setting of the squish.
nevhall Posted July 19, 2009 Author Report Posted July 19, 2009 Cheers folks, I'll give them a ring as well. Ta.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.