Big_Kingy Posted September 26, 2011 Report Share Posted September 26, 2011 I have the ex Foolery ZZR600 ('93 E) in bits, what parts will fit my ZX6R ('99 G2)? It have braided lines which I'm guessing will fit, what about the full Micron system exhaust? Any other parts worth holding onto? Link to comment Share on other sites More sharing options...
kwakbiker Posted October 1, 2011 Report Share Posted October 1, 2011 Hmm, tricky, lines yes but not sure on the zorst, if it was an F model 6 then I believe they will. Think your pretty much stuck as the G was pretty much new design Link to comment Share on other sites More sharing options...
Pat Posted October 1, 2011 Report Share Posted October 1, 2011 Wouldn't be too sure about the exhaust as the ZZR was based on the old GPZ/X600 engine with the cam chain running between cylinders 2&3 whereas the ZX-6R was a whole new engine from the original F model & had the cam chain running up the R/H side. Link to comment Share on other sites More sharing options...
Big_Kingy Posted October 2, 2011 Author Report Share Posted October 2, 2011 Cheers peeps. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.