banoffee Posted June 17, 2010 Report Share Posted June 17, 2010 Found a tiny amount of play today so looking at the bits to order. Any advice from people who've done this job before? Am assuming I need 2 x bearings 2 x seals and 1 x lock nut (have got the part numbers). Anything else? Link to comment Share on other sites More sharing options...
banoffee Posted June 17, 2010 Author Report Share Posted June 17, 2010 Got it all apart now and the larger bearing was bone dry! Feels a lot better now I filled it full of grease Fingers crossed that will improve things considerably. Got to be good for a hp or two too Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.