speedy sie Posted May 5, 2010 Report Share Posted May 5, 2010 looking for one,but does eny know if later units fit? Link to comment Share on other sites More sharing options...
lorenzo Posted May 6, 2010 Report Share Posted May 6, 2010 Read somewhere that TL clutches fit. You'll have to do more research though, as that's about all I know. Link to comment Share on other sites More sharing options...
Timbo S2 Posted May 6, 2010 Report Share Posted May 6, 2010 Yup, tlr slipper clutches fit straight in, though it's a fairly simple device compared to a sigma unit ( much less cost though)! I'm on the lookout for a tlr item myself... Link to comment Share on other sites More sharing options...
crackers81 Posted November 21, 2012 Report Share Posted November 21, 2012 did you guys have any luck? if so could you point me in the right direction please Link to comment Share on other sites More sharing options...
hipringle Posted November 21, 2012 Report Share Posted November 21, 2012 The 600 & 750,s are the same sigma fit from srads to k3 I believe. Link to comment Share on other sites More sharing options...
crackers81 Posted November 21, 2012 Report Share Posted November 21, 2012 thanks hipringle, i'll look into this Link to comment Share on other sites More sharing options...
jaycee Posted November 21, 2012 Report Share Posted November 21, 2012 I never had any bother with back-torque on my SRAD, is it needed or do you guys jusr ride bikes a lot harder than me? In fact the lack of engine braking was a little disconcerting at first after a Bandit600 and a 955 triumph where shutting the throttle was like throwing out an anchor Link to comment Share on other sites More sharing options...
Timbo S2 Posted November 21, 2012 Report Share Posted November 21, 2012 I believe the later k model 750/600 item fits (with a little adjustment to a couple of lugs)... Link to comment Share on other sites More sharing options...
hipringle Posted November 22, 2012 Report Share Posted November 22, 2012 Oooh then I know later standard slipper clutches are cheap! Link to comment Share on other sites More sharing options...
krazyk Posted December 6, 2012 Report Share Posted December 6, 2012 Has anyone actually done this mod I can get a k5 600 clutch for €50 from the Debay and could give it a go Link to comment Share on other sites More sharing options...
Gobert Posted December 6, 2012 Report Share Posted December 6, 2012 Has anyone actually done this mod I can get a k5 600 clutch for €50 from the Debay and could give it a go Are the standard K5 600 clutches "slippers"? - I thought they only came in on the K6 600/750 and K5 1000...... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.