zigzag Posted April 5, 2010 Report Share Posted April 5, 2010 Hello wise folks I need to know if the front fender on the ´01 CBR929 Fireblade is the same part as on the VTR SP1 models (similar front forks) (´cause I can get the latter one for a much nicer price, skint me...) Thanks in advance! zig Link to comment Share on other sites More sharing options...
lorenzo Posted April 5, 2010 Report Share Posted April 5, 2010 Not 100% certain, but when I had cbr fronts forks on my bike I was shopping about and there was a few mudguards advertised as being for either bike. Link to comment Share on other sites More sharing options...
1%er Posted April 5, 2010 Report Share Posted April 5, 2010 i have both ill have a look later and get back to you Link to comment Share on other sites More sharing options...
zigzag Posted April 6, 2010 Author Report Share Posted April 6, 2010 Thx lorenzo and 1%er, telling from the pictures I´ve seen they look absolutely similar but the SP1 Hondas have different fork "shoes" so I must know for sure. So a big thanks to 1%er for looking it up! Link to comment Share on other sites More sharing options...
1%er Posted April 6, 2010 Report Share Posted April 6, 2010 ok i didnt have time to screw off and fiddle with them but i did take a few measurements and i am sure they are the same. couldnt see anything that looked different at all HTH Link to comment Share on other sites More sharing options...
zigzag Posted April 7, 2010 Author Report Share Posted April 7, 2010 ok i didnt have time to screw off and fiddle with them but i did take a few measurements and i am sure they are the same. couldnt see anything that looked different at all HTH Time for me to put a big crate of beer in a rented car and come over to the forumtrackday! Ace! Thanks a lot! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.