speedy sie Posted March 29, 2010 Report Share Posted March 29, 2010 some one to cut some teath in to a shaft for my magnesium xro6 spoket/cluch depreser. it works on a splined shaft, and a tothed gear cut rod all sitting in a housing,is quite easy to do ,but i need some one who could teeth the rod,as i have the slined shaft,better if you pm me and ill give you my number and explane it.oh i have the shaft i need to be toothed,it is stainless steal,as this will have to. Link to comment Share on other sites More sharing options...
blow_away Posted March 29, 2010 Report Share Posted March 29, 2010 Sie, if I understand you properly, you need someone like Llewellins for this job http://www.llewellins.co.uk/ Link to comment Share on other sites More sharing options...
paul8899 Posted March 29, 2010 Report Share Posted March 29, 2010 Am I right in thinking that you have a splined sprocket that you need fitting to a blank shaft ? Any pictures of the bits , I might be able to help Link to comment Share on other sites More sharing options...
speedy sie Posted March 29, 2010 Author Report Share Posted March 29, 2010 no iv got a round bar that i need teath cutting to.and the splined shaft pushes this towards the cluch shaft. Link to comment Share on other sites More sharing options...
eddie Posted April 2, 2010 Report Share Posted April 2, 2010 Bung up some pics, don't understand what you mean? What do you mean by "teeth" Link to comment Share on other sites More sharing options...
speedy sie Posted April 2, 2010 Author Report Share Posted April 2, 2010 ill take some pics later,but in afect its a rack and pinoin set up.i need the rack,wich will be round bar with the teath cut into it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.