szrdave Posted January 19, 2021 Report Share Posted January 19, 2021 Anyone know what gas pressure and oil viscosity Nitron use for their shocks (NTR3 from my Daytona 675)? Nitron don’t have any kind of support network over here, and the shock is about 5 years old so would definitely benefit from a service. A colleague used to work for WP and will do the job, he can always measure the pressure and viscosity of the oil that comes out, but it would be good to know what the values should be from new! Quote Link to comment Share on other sites More sharing options...
Pinkbike1 Posted January 20, 2021 Report Share Posted January 20, 2021 Pm @Sideshow Pobhe can service them so will no doubt have the info you need. 1 Quote Link to comment Share on other sites More sharing options...
Sideshow Pob Posted January 20, 2021 Report Share Posted January 20, 2021 2.5 wt oil and 10 bar pressure. 2 Quote Link to comment Share on other sites More sharing options...
szrdave Posted January 20, 2021 Author Report Share Posted January 20, 2021 14 hours ago, Sideshow Pob said: 2.5 wt oil and 10 bar pressure. Thanks for that, it's what he suggested already but good to confirm! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.