bignige Posted May 26, 2013 Report Share Posted May 26, 2013 Just bought a original gasket to mate the akrapovic end can to the original collector. Hmm, it's Not a perfect fit. Which leads me to the question. How would you make one? It's one of those mesh easily crushable ones. Loads of exhaust paste? Spacer? Suggestions please. :-) Link to comment Share on other sites More sharing options...
dansp1 Posted May 26, 2013 Report Share Posted May 26, 2013 coke cans for shimming and high temp silicone for sealing Link to comment Share on other sites More sharing options...
VanWinkle Posted May 26, 2013 Report Share Posted May 26, 2013 Ive used a non setting type silicon before, was on my old zzr 600. Link to comment Share on other sites More sharing options...
Evilchicken0 Posted May 27, 2013 Report Share Posted May 27, 2013 I used aluminium lathe and jointing paste Link to comment Share on other sites More sharing options...
bignige Posted May 27, 2013 Author Report Share Posted May 27, 2013 I may need to start drinking coke.. What's this high temp silicone you speak of? Link to comment Share on other sites More sharing options...
Evilchicken0 Posted May 27, 2013 Report Share Posted May 27, 2013 Type it into eBay Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.