VanWinkle Posted September 5, 2012 Report Share Posted September 5, 2012 [media=] Link to comment Share on other sites More sharing options...
Beanerno1 Posted September 5, 2012 Report Share Posted September 5, 2012 What the feck happened there? Link to comment Share on other sites More sharing options...
wesifume Posted September 5, 2012 Report Share Posted September 5, 2012 Rotor got caught up in the Metal line that was attached underneath the coptor, to the top of the metal mast. Coptor went to low/ too close to the line. Wocka wocka wocka . Link to comment Share on other sites More sharing options...
HeadtheBall Posted September 5, 2012 Report Share Posted September 5, 2012 The dude on the ground grabbed the line and pulled it. The straightened it enough for the rotor to catch it. Link to comment Share on other sites More sharing options...
Andy93 Posted September 9, 2012 Report Share Posted September 9, 2012 Pilot very nearly fell out!! Link to comment Share on other sites More sharing options...
IforB Posted September 13, 2012 Report Share Posted September 13, 2012 Lucky bastards. The pilot deciding to do that in such close proximity to wires (otherwise known as helicopter catchers) is a fool. Simple as that. You don't leave so little margin for error when flying any aircraft, let alone when so close to people. No sympathy for the moron. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.