tootall Posted March 25, 2012 Report Share Posted March 25, 2012 Anyone got a haynes for an old cbr1000f? Doin fork seals need to know how much to put back in. Or if anyone fancies google witchery to find out for me that'd be geat. Am usin crap fone that crashes when I try to google. Ta J Link to comment Share on other sites More sharing options...
Jenny Pryde Posted March 25, 2012 Report Share Posted March 25, 2012 "Fork oil levels measured from top of tube with fork spring removed and leg fully compressed . 1000h/j models.....................148mm(5.8in)1000K models onward.............172mm(6.8in) This is measured with the fork vertical." N.B I just lifted this off a CBR site, so don't blame me if it all goes horribly wrong. Link to comment Share on other sites More sharing options...
BudgetBoy Posted March 25, 2012 Report Share Posted March 25, 2012 CBR1000F 1988-1999 year are all 409cm3 per fork leg seal sizes is 41-54-11 Link to comment Share on other sites More sharing options...
tootall Posted March 25, 2012 Author Report Share Posted March 25, 2012 Hmmn think I need a second opinion! Just seems like a lot of oil. 250ml gives an air gap of 19cm Edit: Cheers budget boy. Seems I need to buy some moe bloody fork oil! Link to comment Share on other sites More sharing options...
tootall Posted March 25, 2012 Author Report Share Posted March 25, 2012 Hmmn think I need a second opinion! Just seems like a lot of oil. 250ml gives an air gap of 19cm Bloody fone. Cheers budget boy. Need more oil then. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.