R1 swingarm removal

[MonkeyJim]

I would like to remove the swingarm so I can grease up the bearings etc.

I've already ordered the swingarm removal kit from Abba to fit their stand, to do the job.

Trouble is I've got an R&G crash bung fitted and I can't get in to measure up the swingarm spindle nut.

It looks like a 30mm size but my regular 30mm socket is too wide to fit inside the R&G cup.

Anyone know what size the swingarm spindle nut size is? Think I'll have to get a thin walled socket to get in there.

BTW it's a 4xv '99 vintage model.

Ta muchly in advance

[porter_jamie]

Uploaded with ImageShack.us

27mm

[MonkeyJim]

Thanks Jamie