si.likes.guiness Posted October 16, 2008 Report Posted October 16, 2008 heres my work in progress,lots of carbon.hrc bits,f3 rad,harc pro ramair box the list is big
si.likes.guiness Posted October 22, 2008 Author Report Posted October 22, 2008 cheers mate and today ive bolted the big rs 250 carbs and manifolds on amnd they fit snuggly in the ramair box
2Smoke Posted October 22, 2008 Report Posted October 22, 2008 bah bet it runs rough with them on. it'll be terribly uneconomical too! On the constructive side, are you keeping the hugger as it is? Looks a tad big to me
si.likes.guiness Posted October 22, 2008 Author Report Posted October 22, 2008 it may take a bit of setting up but i love all that,ive got a base setting to work from and the hugger will have a couple of stickers on it.i will post a pic of the rsw it will be a replica of
si.likes.guiness Posted October 22, 2008 Author Report Posted October 22, 2008 heres a pic of the bike its going to be a replica of
si.likes.guiness Posted October 22, 2008 Author Report Posted October 22, 2008 bollocks that didnt work
2Smoke Posted October 22, 2008 Report Posted October 22, 2008 It will look nice when done! Different scheme too, nice change from the norm. Who rides the rsw in your pics? Setting up can be a buzz! Just dont go too lean eh! hehe
si.likes.guiness Posted October 22, 2008 Author Report Posted October 22, 2008 its takumi takahashi ( yuki's younger brother) one of the top teams in japan and liked it because its simple yet nice and as you say not the normal paint schemes you see
fontyyy Posted October 24, 2008 Report Posted October 24, 2008 Looks sweet, I quite fancy doing mine like this for next years F250; It's Ratthapark Wilarot's bike.
si.likes.guiness Posted October 24, 2008 Author Report Posted October 24, 2008 i nearly went with that or this was a very close second
2Smoke Posted October 27, 2008 Report Posted October 27, 2008 Nah the red's better! White is a devil to keep clean too
si.likes.guiness Posted October 28, 2008 Author Report Posted October 28, 2008 this is how she looks today ive stuck the marchesini front and rsvr disks and calipers in,all now is few brackets and she nearly ready for action
billysbones Posted October 28, 2008 Report Posted October 28, 2008 this is how she looks today ive stuck the marchesini front and rsvr disks and calipers in,all now is few brackets and she nearly ready for action TOB. But are you keeping those blue cans? Will look a bit odd on a red bike. (Which by the way i love. little bit of individual thinking)
si.likes.guiness Posted October 28, 2008 Author Report Posted October 28, 2008 cheers mate i wanted to do something different to my nsr and ive got some johnson cans to put on but need to mod the chambers as the cans are going to be held on with springs like the gp bikes
heds954 Posted October 30, 2008 Report Posted October 30, 2008 Looks sweet, I quite fancy doing mine like this for next years F250; It's Ratthapark Wilarot's bike. you leave yer fag packet paint alone young man!! BTW nice looking bike SLG, keep up the good work
nzknut Posted November 18, 2008 Report Posted November 18, 2008 reminds me of norick abe's blue fox/mister donut NSR500... loved that paint scheme eh.
si.likes.guiness Posted November 18, 2008 Author Report Posted November 18, 2008 the blue fox is an old fave of mine as well simple design but looks good
si.likes.guiness Posted November 27, 2008 Author Report Posted November 27, 2008 ive now got my grubby hands on an isr front master cylinder
levo Posted December 6, 2008 Report Posted December 6, 2008 ive now got my grubby hands on an isr front master cylinder That looks cool .............a bit like one of the terminator fingers me...very jealous!!!!!!!!!
SHimmer45 Posted December 6, 2008 Report Posted December 6, 2008 hmmmm aftermarket market levers seriously considering getting some fancy levers for my KR1-S gotta be done
si.likes.guiness Posted December 6, 2008 Author Report Posted December 6, 2008 yes its definatly bonkers looking and was going to get an r1 radial master cylinder but got this for£99 which was nice,but now want the clutch lever .ive put and batterd old johnson can on the bike to show what she will look like when ive had the chambers modded and my new johnsons fitted.im having the cans held to chambers on springs instead of the 3 bolts.
B@W Posted December 6, 2008 Report Posted December 6, 2008 yes its definatly bonkers looking and was going to get an r1 radial master cylinder but got this for£99 which was nice,but now want the clutch lever .ive put and batterd old johnson can on the bike to show what she will look like when ive had the chambers modded and my new johnsons fitted.im having the cans held to chambers on springs instead of the 3 bolts. What happened to Johnson. I had his silencers on my kitted RGV that I raced back in the day: lovely quality, really trick
si.likes.guiness Posted December 6, 2008 Author Report Posted December 6, 2008 im not realy sure mate
si.likes.guiness Posted December 28, 2008 Author Report Posted December 28, 2008 ive finaly got some dunlop kr364 tyres for the bike so i can get the rear magtek powdercoated black to match the marchesini front .also getting an isr clutch lever to match the front master cylinder and ive tracked down a shock and took the harc pro ramair off for now as i just want to get her running on th rs carbs first
VARIABLE9 Posted December 29, 2008 Report Posted December 29, 2008 Fcuking sweet! Which clip ons are those - just wondering. Love the 250 two smokers.
si.likes.guiness Posted December 29, 2008 Author Report Posted December 29, 2008 cheers and the clip ons are harris performance mate
VARIABLE9 Posted January 1, 2009 Report Posted January 1, 2009 cheers and the clip ons are harris performance mate Copy that, thanks!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.